Carron Phoenix Inca Filter Tap Brass Casing 3449R

Genuine Carron Phoenix Inca Filter Tap Brass Casing 3449R

The 3449R / SP3449 Brass Casing is used with the Carron Phoenix Inca Filter Tap to house and support the filter diverter cartridge. If the casing becomes damaged or worn, replacing it allows the existing tap and diverter system to continue working without replacing the complete tap.

🟨 IMPORTANT- This listing is for the brass casing only. The diverter cartridge is not included and must be purchased separately if required.

Here is a link to all the spare parts we stock for the Carron Phoenix Inca Filter Tap.

Useful Tips - Removing and Fitting the 3449R / SP3449 Brass Casing

Before starting, turn off the water supply to the tap and open the tap to release any remaining water pressure.

To replace the casing, the tap handle must first be removed to gain access to the diverter assembly. The existing diverter cartridge is removed, allowing the brass casing to be unscrewed and replaced. Once the new casing is fitted, the compatible diverter cartridge is refitted and the tap is reassembled.

How To Replace Your Tap Valve

Replacing a tap valve is usually a quick and simple repair. Always turn off the water supply before starting.

1. Remove the handle
The handle is usually secured by a grub screw underneath the lever or a screw hidden behind the hot/cold indicator on the side of the lever. Remove the screw and gently pull the handle off.

2. Remove the valve cover / shroud if applicable
If your tap has a valve cover or shroud, unscrew and remove it.

3. Remove the old valve
Using a suitable spanner, turn the valve anticlockwise and remove it. If it is very tight, use a descaling solution, white vinegar, lemon juice or WD-40 to help loosen it. Allow it time to work before trying again. If a brass bush is fitted and comes out with the old valve, don't worry. It can usually be separated from the valve. If not, replacement bushes are available from us. Take care not to damage the threads.

4. Fit the new valve
Before fitting, compare the new valve with the old one to check the length, thread, splines and opening direction. Screw the new valve in by hand first to avoid cross-threading, then tighten with a suitable spanner. Do not overtighten.

5. Refit the handle and test
With the valve fully closed, refit the handle in its normal off position, making sure it is correctly aligned. Secure the handle and slowly turn the water back on. Check that the tap operates smoothly and the dripping has stopped.

Why Buy from TapSparesUK

For over 40 years, TapSpares UK has been designing and manufacturing quality kitchen taps and replacement tap parts. As one of the UK's leading specialists in replacement valves, cartridges, bushes and tap spares, we help homeowners, plumbers and installers repair leaking and dripping taps quickly and cost-effectively. Our parts are manufactured using premium brass and ceramic components for long-lasting performance, helping you save money while reducing waste.

Over 40 years of industry expertise.
12-month guarantee on all parts.
Premium brass and ceramic construction.
Vernier adaptors included where required.
Fast, free UK delivery direct from our factory.
Trusted by plumbers, installers and homeowners nationwide.
Installation guides available for many products.
Friendly UK technical support before and after your purchase.

We stock replacement parts for many leading kitchen tap brands, including Perrin & Rowe, Franke, Abode, John Lewis, Howdens, Wren, CDA, Bristan, San Marco and Carron Phoenix.

Not sure which tap spare part you need? Send images of your tap and/or valve via our Identify my tap form.