"CDA TC55 Hot Valve Cartridge Post 2013 - SP3819" has been added to your basket

View basket
 

CDA TC55 Hot Valve Cartridge Post 2013 - SP3819

SKU: 3819RHATH
Genuine replacement hot valve cartridge designed to stop dripping from the top of the spout. This cartridge is fully compatible with CDA TC55 models manufactured after 2013. SP3819.
£19.00
Free UK Delivery
- +

Genuine CDA TC55 Hot Valve Cartridge Post 2013 - SP3819

SP3819 Hot Valve, required to stop your tap dripping from the top of the spout or around the handle.

⚠ IMPORTANT: CHECK VALVE COMPATIBILITY

This high-quality genuine replacement valve is suitable for later CDA TC55 taps fitted with the SP3819 cartridge.

In 2013, CDA changed the valve specification from the earlier 1212R/SP1212 to the SP3819.

Looking for the earlier valve? If your tap uses the original 1212R/SP1212 cartridge, you can find it here: Shop CDA 1212R/SP1212 Replacement Valve

Please check your existing valve or installation guide before ordering.

Tap Valve Measurements

  • Nut Height: 6mm
  • Splines: 20
  • Overall Height: 50mm
  • Thread Diameter: 21mm

If your tap is dripping from the bottom of the spout, where it meets the tap body, the you may need to replace the O-Rings.

Looking for another part ?

View all CDA TC55 Tap Spare Parts.

How To Replace Your Tap Valve

Replacing a tap valve is usually a quick and simple repair. Always turn off the water supply before starting.

1. Remove the handle
The handle is usually secured by a grub screw underneath the lever or a screw hidden behind the hot/cold indicator on the side of the lever. Remove the screw and gently pull the handle off.

2. Remove the valve cover / shroud if applicable
If your tap has a valve cover or shroud, unscrew and remove it.

3. Remove the old valve
Using a suitable spanner, turn the valve anticlockwise and remove it. If it is very tight, use a descaling solution, white vinegar, lemon juice or WD-40 to help loosen it. Allow it time to work before trying again.  If a brass bush is fitted and comes out with the old valve, don't worry. It can usually be separated from the valve. If not, replacement bushes are available from us. Take care not to damage the threads.

4. Fit the new valve
Before fitting, compare the new valve with the old one to check the length, thread, splines and opening direction. Screw the new valve in by hand first to avoid cross-threading, then tighten with a suitable spanner. Do not overtighten.

5. Refit the handle and test
With the valve fully closed, refit the handle in its normal off position, making sure it is correctly aligned. Secure the handle and slowly turn the water back on. Check that the tap operates smoothly and the dripping has stopped.

Valve Installation Video

DIY Repair Guides

Explore our collection of DIY Repair Guides covering common tap repairs, maintenance tips, troubleshooting advice, and step-by-step guides to help you fix everyday tap problems.

Videos & Frequently Asked Questions

Why Buy from TapSparesUK

For over 40 years, TapSpares UK has been designing and manufacturing quality kitchen taps and replacement tap parts. As one of the UK's leading specialists in replacement valves, cartridges, bushes and tap spares, we help homeowners, plumbers and installers repair leaking and dripping taps quickly and cost-effectively. Our parts are manufactured using premium brass and ceramic components for long-lasting performance, helping you save money while reducing waste.

  • Over 40 years of industry expertise.
  • 12-month guarantee on all parts.
  • Premium brass and ceramic construction.
  • Vernier adaptors included where required.
  • Fast, free UK delivery direct from our factory.
  • Trusted by plumbers, installers and homeowners nationwide.
  • Installation guides available for many products.
  • Friendly UK technical support before and after your purchase.

We stock replacement parts for many leading kitchen tap brands, including Perrin & Rowe, Franke, Abode, John Lewis, Howdens, Wren, CDA, Bristan, San Marco and Carron Phoenix.

Not sure which tap spare part you need? Send images of your tap and/or valve via our Identify my tap form.