The Franke Planar tap has differing valves. If you have a post 2008 tap, these are likely to be the valves you require, however there are more recent versions of the Planar which require SP3547 valves. Please check your installation guide or remove your current valve and check if you require these valves. Please get in touch and share images of your current valve if you'd like us to help.
1427R/SP3561/2307R - Overall Height: 53mm, Nut Height: 8mm, Diameter at thread: 21mm, Splines: 28, Height of splines: 10mm
TapSparesUK's fully compatible, replacement valves/cartridges are sold as a pair and will make your Franke Planar as good as new. Fit them to stop your tap dripping from the end of its spout.
PLEASE NOTE: Take care when removing your old valve - it is common for a chunky brass ring (the bush) to come out at the same time. If this happens and you cannot separate the two, you will need to also replace the brass bush. Please see the image below. (this picture is generic and may not match your valve exactly)
.png)
- Valves/cartridges guaranteed for 12 months from purchase
- Quality brass and ceramic materials
- Verniers included, where required
- Shipped direct from our UK factory
- Tried and trusted by installers and consumers alike
- No quibble returns policy
- Fast, easy fit with detailed installation guides for all parts and components available to download online
- Unsure? Call our friendly, knowledgeable tech team 01603 559096