Triflow Olympus Tap Spare Parts – Replacement Valve Cartridges & O-Ring Kits
We stock quality replacement valves cartridges and O-ring kits to help you repair your tap and restore it to proper working order without replacing the entire tap.
Which Replacement Part Do You Need?
- Tap dripping from the end of the spout? You will most likely need to replace the relevant tap valve or cartridge.
- Water leaking around the joint between the base of the spout and the tap body? A replacement O-ring kit is usually required to resolve this type of leak.
To make the repair easier, why not also purchase our silicone grease? It helps lubricate the O-rings during installation and makes fitting replacement seals easier.
Is Your Tap a Triflow Olympus or a Filterflow Olympus?
It is important to identify your tap correctly before ordering spare parts, as the Triflow and Filterflow ranges use different components. The original Triflow taps were manufactured until May 2011, after which they were replaced by the Franke Filterflow range.
The easiest way to tell the difference is by looking at the markings on top of the handle levers:
- Triflow Olympus: Coloured dots – red, green and blue.
- Franke Filterflow Olympus: Etched letters – H (Hot), F (Filtered) and C (Cold).
Looking for the Franke Filterflow Olympus?
If your tap has the H, F and C markings rather than coloured dots, you need spare parts for the newer Franke Filterflow Olympus range.
Need help identifying, removing or replacing your tap spare part? Take a look at some of our helpful guides:
