Franke Olympus Valve 3561R cartridge set

Fully compatible with the Franke Olympus Tap, TapSparesUK replacement valves/cartridges are available individually or as a pair. Designed to restore smooth operation, they help stop leaks and drips from the top of the spout or around the tap handle.

This valve has also been listed on various spec sheets as 1427R, 2552R, 3561R, SP3561 or 4276R.

🟨 IMPORTANT- These valves are NOT compatible with early-generation Olympus G taps featuring red and blue rings at the base of the lever handles. We do not stock the correct replacement valves for these models. Please check your tap before ordering.

Tap Valve Measurements

Nut Height: 8mm
Splines: 28
Overall Height: 53mm
Diameter at thread: 21mm

⚠️ Take care when removing your old valve

When removing an old tap valve, it is common for the brass retaining ring (also known as the bush) to come out attached to the valve. Although it may seem stuck, the bush can usually be removed and reused.

If the bush is difficult to separate from the old valve, apply a small amount of penetrating oil or WD-40 around the joint and leave it for a few minutes to work. Carefully loosen the bush, taking care not to damage the threads.

Once removed, screw the bush back into the tap body and tighten securely. You can then fit your replacement tap valve as normal.

If the bush is damaged or cannot be removed, a replacement bush may be required.

Please see the image below (for illustration only; your valve may differ slightly).
Valve bush illustration

Still having trouble?
Replacement bushes are available here: One bush is required per valve.

Here is a link to all the spare parts we stock for the Franke Olympus Tap

Installation Video

Need Help? FAQ Guide

View our full FAQ guide for step-by-step answers, videos and common installation questions.

View FAQ Guide

Why Buy from TapSparesUK

For over 40 years, TapSpares UK has been designing and manufacturing quality kitchen taps and replacement tap parts. As one of the UK's leading specialists in replacement valves, cartridges, bushes and tap spares, we help homeowners, plumbers and installers repair leaking and dripping taps quickly and cost-effectively. Our parts are manufactured using premium brass and ceramic components for long-lasting performance, helping you save money while reducing waste.

Over 40 years of industry expertise.
12-month guarantee on all parts.
Premium brass and ceramic construction.
Vernier adaptors included where required.
Fast, free UK delivery direct from our factory.
Trusted by plumbers, installers and homeowners nationwide.
Installation guides available for many products.
Friendly UK technical support before and after your purchase.

We stock replacement parts for many leading kitchen tap brands, including Perrin & Rowe, Franke, Abode, John Lewis, Howdens, Wren, CDA, Bristan, San Marco and Carron Phoenix.

Not sure which tap spare part you need? Send images of your tap and/or valve via our Identify my tap form.

MENU

Franke Olympus Valve 3561R cartridge set